Upgrade path from PAN-OS 6.0.4 to PAN-OS 6.1.6

This is a note on upgrading from PAN-OS 6.0.4 to PAN-OS 6.1.6

1. Save running configuration and export it to external location.
  Export config file to PC's local drive.

2. Make sure the firewall is running Content Release version 454 or later.

3. Download PAN-OS on PaloAlto device console

1) Select version "6.1.0" and Download.
  <Normal Result Window>
  Operation: Download
  Status: Completed
  Result: Successful
  Details: Successfully downloaded
               Preloading into software manager
               Successfully loaded into software manager

  If Download cannot be done due to network failure, you can
  Download PAN-OS from PaloAlto Support Site to local PC
    Link:[ https://support.paloaltonetworks.com ]
    Tools --> Software Update
    Find version and download firmware:
    a. for PA200
        e.g. "6.1.0  10/25/2014  PanOS_200-6.1.0  318.2 MB"
    b. for PA3020
        e.g. "6.1.0  10/25/2014  PanOS_3000-6.1.0  391.7 MB"

  Note:

•    Downloadable firmware OS depends on registered products.
•    Link to "Release Notes" and "Download" on PaloAlto devices may not be usable, due to network failure.

  Upload Firmware from PC to PaloAlto
    Version 6.1.0
    In [Device] tab --> Select at "Software" in left pane
    Use Upload in the bottom menu.
    Confirm uploaded firmware status

  Note:

• If error "upload file size exceeds system limit" occurs, you might require to delete old firmware. 

2) Select version "6.1.6" or supported version, and Download.

    Supported by Hitachi Solutions Ltd. ( as of 12/15/2015 )

PANOS 6.1.6	弊社評価を完了し、  2015/9/1リリースしました。	PA-200/500/2000/3000/4000/  5000シリーズ用
PANOS 6.1.5	弊社評価を完了し、  2015/8/21リリースしました。	PA-200/500/2000/3000/4000/  5000シリーズ用
PANOS 6.1.4	弊社評価を完了し、  2015/7/31リリースしました。	PA-200/500/2000/3000/4000/  5000シリーズ用
PANOS 6.0.11	弊社評価を完了し、  2015/10/1リリースしました。	PA-200/500/2000/3000/4000/  5000シリーズ用
PANOS 6.0.8	弊社評価を完了し、  2015/2/20リリースしました。	PA-200/500/2000/3000/4000/  5000シリーズ用

- End -